La Taberna del Puerto

La Taberna del Puerto (https://foro.latabernadelpuerto.com/index.php)
-   Foro Náutico Deportivo (https://foro.latabernadelpuerto.com/forumdisplay.php?f=2)
-   -   Electrónica Weather routing a lo barato (https://foro.latabernadelpuerto.com/showthread.php?t=101099)

... 10-12-2012 09:40

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1412416)
qtVlm 3.3.5 has been released.

It should fix the problem concerning raymarine NMEA sentences, and most importantly it supports Spanish :) Many thanks to Tropelio for the translation...

Sources for build in Linux please. Where can i find it?:nosabo: Or better.... a *.deb package.

I'm Still in (stuck) 3.2-9+

maitai 10-12-2012 10:21

Re: Weather routing a lo barato
 
There is no deb package, sorry.

Sources for compilation are here: svn://svn.code.sf.net/p/qtvlm/code/trunk

Please note that after the make you can run "make instal" to finally instal qtVlm where you want. See the readme.

... 10-12-2012 11:16

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1412440)
There is no deb package, sorry.

Sources for compilation are here: svn://svn.code.sf.net/p/qtvlm/code/trunk

Sorry but this link never worked for me. I know some other Linux users with the same problem.

Can you hang the sources in any other place for us?:sorry::gracias:

... 10-12-2012 11:32

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1412440)
Please note that after the make you can run "make instal" to finally instal qtVlm where you want. See the readme.

No problem with this. Acctually I did it before for the old version 3.2-9.
The real trouble I encountered was finding the sources.
Finally I found (the oldest) in a french forum (I think).:santo:

maitai 10-12-2012 11:45

Re: Weather routing a lo barato
 
The best way is the following:

Install subversion if this is not already done:

#sudo apt-get install subversion

get the sources:

#svn checkout svn://svn.code.sf.net/p/qtvlm/code/trunk

Compile qtVlm:

#cd trunk
#make

Install it

#make install

... 10-12-2012 12:37

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1412484)
The best way is the following:

Install subversion if this is not already done:

#sudo apt-get install subversion

get the sources:

#svn checkout svn://svn.code.sf.net/p/qtvlm/code/trunk

Compile qtVlm:

#cd trunk
#make

Install it

#make install

Hi. Now I got subversion but the problem is still the same.:santo:

The output says: La ubicacion especificada no esta soportada (the specified place is not supported).:nosabo:

The command is:

xdg-open svn://svn.code.sf.net/p/qtvlm/code/trunk

When I try with de browser just don't works.


EDITING.:borracho:
Sorry, sorry, sorry:sorry:......
svn checkout svn://svn.code.sf.net/p/qtvlm/code/trunk

yes..... It really works. Thanks a Lot.:gracias::cid5:

... 10-12-2012 14:35

Re: Weather routing a lo barato
 
Built and working.... Just great.:pirata::pirata:

Compilado y funcionando en Linux.... Estupendo.:cid5:

LSV 10-12-2012 17:50

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por pinguino (Mensaje 1412510)
svn checkout svn://svn.code.sf.net/p/qtvlm/code/trunk
yes..... It really works. Thanks a Lot.:gracias::cid5:

Saludos.
Yo he entrado (desde Windows) con esta dirección: http://svn.code.sf.net/p/qtvlm/code/trunk/
:brindis:

... 10-12-2012 18:22

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por LSV (Mensaje 1412657)
Saludos.
Yo he entrado (desde Windows) con esta dirección: http://svn.code.sf.net/p/qtvlm/code/trunk/
:brindis:

Si, pero hay que ir bajando los archivos de uno en uno...... mortal.:nop:

Tucana 10-12-2012 19:09

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por Tropelio (Mensaje 1402180)
Hola Butxeta,

Me temo que sólo admite polares en el formato que trae. En cuanto a la interpolación, siempre puedes currártelo un poco: fotocopia la gráfica de las polares de tu barco ampliándola todo lo que puedas. Quizás así puedas sacar más ángulos y velocidades para completar la tabla. Otra opción, más coimplicada, es digitalizar las curvas de polares que tienes y ajustarlas por una función matemática de dos variables. Entonces puedes interpolar todo lo que quieres, claro que esto requiere programar...

Saludos,
Tropelio

La que has liado cofrade y generosoTropelio...
Gracias por desasnarnos, al menos ami; aunque yo necesitaría clases particulares.
Tomenmos una copita que eso me sale mejor.:brindis:

LSV 10-12-2012 23:14

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por pinguino (Mensaje 1412570)
Built and working.... Just great.:pirata::pirata:

Compilado y funcionando en Linux.... Estupendo.:cid5:

Así esa dirección funciona de alguna manera¿svn://svn.code.sf.net/p/qtvlm/code/trunk?

... 11-12-2012 08:18

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por LSV (Mensaje 1412886)
Así esa dirección funciona de alguna manera¿svn://svn.code.sf.net/p/qtvlm/code/trunk?

El comando a usar es:

svn checkout svn://svn.code.sf.net/p/qtvlm/code/trunk

Recuerda que debes tener también instaladas las dependencias que dicen en la wiki del programa y el paquete subversion.

Ehhmmm.. ¿supongo... usas Linux no? Es que en win no funcionará. No se si hay manera para win.

LSV 11-12-2012 11:37

Re: Weather routing a lo barato
 
Para el que tenga que bajarlos desde Windows hay downloaders (descargadores) que lo hacen automáticamente.
Por ejemplo jDownloader.

icordoba 10-01-2013 22:50

Re: Weather routing a lo barato
 
Buenas noches caballeros...
¿Alguno tenéis las polares para un Dufour 325? (O un crucero similar de 32/33 pies... Oceanis 323, hanse 320... )

Las tengo en gráfico pero... qué pereza ir midiendo para crear la tablita...

:brindis:

Keith11 10-01-2013 22:55

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por icordoba (Mensaje 1428497)
Buenas noches caballeros...
¿Alguno tenéis las polares para un Dufour 325? (O un crucero similar de 32/33 pies... Oceanis 323, hanse 320... )

Las tengo en gráfico pero... qué pereza ir midiendo para crear la tablita...

:brindis:

si te vale las del dufour 34 las encontraras en mi web...

La web del Tunante

icordoba 10-01-2013 23:03

Re: Weather routing a lo barato
 
El 34 es un barco más rápido que el 325, sobre todo con poco viento... pero a falta de las mías ¡bienvenidas!
Muchas gracias.

maitai 09-03-2013 18:56

Re: Weather routing a lo barato
 
FYI version 3.4.0 has been released a few days ago. Many thanks to Luis for the translation in Spanish :brindis:

patxikiter 09-03-2013 20:21

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1459310)
FYI version 3.4.0 has been released a few days ago. Many thanks to Luis for the translation in Spanish :brindis:

Hi Maitai
Is mac version working properly? i cant select an area to donwload the grub.

Thank you for your help

maitai 10-03-2013 09:06

Re: Weather routing a lo barato
 
Hello,

The ways to select an area and to move the map have changed in this version. You can now move the map directly with click and drag, and to select an area you must press <shift> and then click and drag. You can also use the selection button in the toolbar.

... 10-03-2013 10:43

Re: Weather routing a lo barato
 
New version 3.4.0 works like a charm in my Ubuntu 13.04 .:pirata::pirata:

The new improvements are really welcome.:adoracion: But I missed gpsd support. Maybe in the next release?:santo:

Thanks a Lot.:sip:

:velero:

La nueva versión funciona estupendamente en mi Ubuntu 13.04.

Las nuevas mejoras son realmente bienvenidas. Pero echo en falta el soporte para gpsd. ¿Tal vez en la siguiente versión?

Muchas gracias.

patxikiter 10-03-2013 11:04

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1459489)
Hello,

The ways to select an area and to move the map have changed in this version. You can now move the map directly with click and drag, and to select an area you must press <shift> and then click and drag. You can also use the selection button in the toolbar.


Thx a lot mate, great job

... 10-03-2013 12:37

Re: Weather routing a lo barato
 
Dado que algunos de los que se acercan a qtvlm puede que sean recién iniciados en Linux y puesto que en qtvlm aún no hay otro método de instalarlo que no sea el de compilarlo, he pensado en hacer una pequeña guía para que lo podáis intentar aquellos que no tengáis mucha experiencia con la compilación de programas.

Lo primero es abrir una sesión de terminal pulsando las teclas Ctrl+Alt+t al mismo tiempo.
En la intimidante pantalla vamos a ir introduciendo los comandos que cual "palabras mágicas" harán las tareas que les pedimos.

Para evitar las confusiones escribiendo comandos, os recomiendo encarecidamente que hagáis uso del copiar-pegar. Es decir, copiáis el comando aquí y después lo pegáis en la consola con Ctrl+MayusculasIzq+v. Así evitaremos errores de tecleo.

El primer comando será para instalar todas las "dependencias", es decir aquellas herramientas que necesitaremos para la tarea de compilación:

sudo apt-get install make gcc g++ qt4-qmake qt4-dev-tools socat subversion

Tras un montón de de Letrajas se deben haber instalado las herramientas.

Ahora descargaremos el código fuente, es decir los "ingredientes" del plato que vamos a cocinar:

svn checkout svn://svn.code.sf.net/p/qtvlm/code/trunk

Tras otro montón de mensajes ya debemos tener el código fuente de la última versión. Ahora vamos a "cocinarlos" compilando el programa.

Entramos en la nueva carpeta que nos habrá creado el comando anterior lleno de código fuente, con este comando:

cd trunk

Ahora a cocinar, metemos este comando:

make

Tardará un rato mas o menos grande según la potencia de vuestro procesador. Entre pocos minutos a media hora. Al tiempo aparecerán cosas en la pantalla que parecerán conjuros del mago Merlin. A mi me encanta, es casi hipnótico.:rolleyes:

Cuando finalize solo falta meter este último comando para rematar la instalación:

make install

Tras esto tendréis una carpeta nueva llamada qtvlm en vuestra carpeta personal. Entráis en ella y veréis el binario ejecutable. Solo hay que hacer doble clic sobre el y ya se ejecutará qtvlm.

Otro día os explicare como crear un icono en el escritorio para que sea mas fácil usarlo.

Rik 10-03-2013 23:31

Re: Weather routing a lo barato
 
Gracias, Tropelio. Llego tarde pero me pongo en materia.:adoracion::adoracion:

patxikiter 11-03-2013 20:01

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1459310)
FYI version 3.4.0 has been released a few days ago. Many thanks to Luis for the translation in Spanish :brindis:

Hi Maitai
i got another problem, as i said i use Mac, i download gribs but i cannot find the way to move through the different days
:nosabo:
thx again

maitai 19-03-2013 16:27

Re: Weather routing a lo barato
 
You can "navigate" through the date with the 2 blue arrows around the dropbox that allows to change the time step (like in zygrib). Or you can select a date with the 3rd icon from the left on the toolbar. Or you can "animate" the grib with the play icon (8th icon on the toolbar).

All this does not work?

patxikiter 19-03-2013 17:40

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1464508)
You can "navigate" through the date with the 2 blue arrows around the dropbox that allows to change the time step (like in zygrib). Or you can select a date with the 3rd icon from the left on the toolbar. Or you can "animate" the grib with the play icon (8th icon on the toolbar).

All this does not work?

I cant find the 2 blue arrows around the dropbox that allows to change the time step, i will up a pic
:brindis:

maitai 19-03-2013 17:54

Re: Weather routing a lo barato
 
If you right-click on the toolbar you can select which sub-toolbars are shown or not. The grib one is checked?

patxikiter 19-03-2013 19:25

Re: Weather routing a lo barato
 
thx maitai
:brindis:

maitai 20-03-2013 18:10

Re: Weather routing a lo barato
 
Please tell me if the grib toolbar is still shown after you restart qtVlm or if you have to ask for it again. Someone on Mac has reported a similar problem and I would like to know if it's ok for you.

HERMES 20-03-2013 19:39

Re: Weather routing a lo barato
 
gracias Tropelio
alguién sabe donde puedo obtener las polares de un oceanis 42.3
ya se que no regatea pero es lo que hay

patxikiter 20-03-2013 20:13

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1465102)
Please tell me if the grib toolbar is still shown after you restart qtVlm or if you have to ask for it again. Someone on Mac has reported a similar problem and I would like to know if it's ok for you.

Hio Maitai
Yes, after restart the program works well.
Thx mate
good job

Tanausu 21-03-2013 13:41

Re: Weather routing a lo barato
 
Una duda con la nueva versión 3.4.0

¿Requiere una instalación en un drive USB para equipos Windows de 32 bits?

¿Si la instalo en C: no va a funcionar en un PC a 32?

¿Puedo dejar instalada la versión anterior sin que se me fastidie al probar?

A ver si alguien ha probado ya a hacerlo.

maitai 21-03-2013 23:17

Re: Weather routing a lo barato
 
The installator will select automatically 32 or 64 bits depending on your machine. You can force it to 32bits if you want to install it on an USB device and be compatible for both.

You can install it in a separate directory from the previous version and it won't interfere with it (i.e. each installation is not linked in any way with windows registery or such, so they are independent).

Tanausu 22-03-2013 11:49

Re: Weather routing a lo barato
 
Muchas gracias maitai.

Probaré la nueva versión, aunque dejando la actual que funciona perfectamente.

Gracias

Invitado_tr 31-03-2013 22:54

Re: Weather routing a lo barato
 
Hi maitai,

I am trying to build qtVlm under Fedora 18. What I have done so far is the following: First I downloaded the "trunk" directory using svn. I have checked that I have all the packages that are needed in order to build qtVlm (in fact, those packages are, if I am not mistaken, the same you need to build zyGrib that I have sucessfully done). Then I moved into the src directory and run make. I got an error because there is no Makefile in the src directory and, therefore, the compiler does not know what to do...

Do you have an idea on how to solve this problem?

Thanks a lot in advance,

Tropelio

maitai 03-04-2013 07:42

Re: Weather routing a lo barato
 
Normally you should have a makefile coming with the trunk. It's located in the trunk directory itself, so you should run the compilation from that directory, not src.

Invitado_tr 03-04-2013 11:27

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1471440)
Normally you should have a makefile coming with the trunk. It's located in the trunk directory itself, so you should run the compilation from that directory, not src.

Thanks a lot maitai, it is working now. I don't know why I was trying to run make from inside the scr directory...

Take care,
Tropelio

maitai 09-09-2013 19:20

Re: Weather routing a lo barato
 
Hello,

FYI version 3.4.1 has been released...

Fair winds to all ;)

dunic 09-09-2013 19:34

Re: Weather routing a lo barato
 
Cita:

Originalmente publicado por maitai (Mensaje 1541964)
Hello,

FYI version 3.4.1 has been released...

Fair winds to all ;)

:cid5: and

:gracias:

PD : descargas: http://www.virtual-winds.org/oxygen/

maitai 31-12-2013 08:40

Re: Weather routing a lo barato
 
Happy new year to all

qtVlm 3.4.4 is almost ready.

Unfortunately the spanish translation has not been updated for a long time. I have send the necessary files to Tropelio (I think) but got no reply... Anyone willing to help?


Todas las horas son GMT +1. La hora es 02:17.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
© La Taberna del Puerto