Probablemente, esos dos plotters y las pruebas que hicieron, fue conectados a una red "simnet", y no via NMEA.
En la pagina 23 del manual (en ingles) del TP22 dice lo siguiente:
Problema: No se puede activar el modo "NAV".
Causas:
- gps/charplotter no esta conectado
- Waypoing no activo
- Se esta usando un formato erroneo de NMEA
Remedio:
- Comprobar las conexiones
- Activar Waypoints
- Comprobar que el navegador esta emitiendo el formato NMEA correcto.
http://www.simrad-yachting.com/Root/...0413-001_w.pdf ----> link del manual.
Revisa también las conexiones (cableado)... que hay varias advertencias al respecto (uso de una bateria comun, etc...).
Tambien el propio "manual" del OpenCPN, dice lo siguiente:
"NMEA Gateways & Multiplexers
NMEA 0183 devices can be connected to a computer via a USB gateway or multiplexer that has been designed for that purpose. A gateway provides a single input and output whereas a multiplexer provides several inputs and one or more outputs.
Although an NMEA 0183 device can be connected directly to a serial port, this is not recommended since the NMEA uses V.11 (RS-422) signals and serial ports use V.28 (RS-232) signals. The two can inter-work, but reliability cannot be guaranteed.
Most of these devices use serial-USB interface chips made by just two manufacturers: FTDI & Prolific. Both these chip makers provide Windows & Mac OS X device driver downloads on their web sites."
suerte.