. si el barco es bandera española, al darlo de baja en España te dan de baja
del mmsi, por lo que hay que borrarlo e introducir otro mmsi
. pero si el barco está comprado por ejemplo en Francia al darte de baja no
te dan de baja del mmsi, éste permanece
. pero antes de realizar estos cambios hay que ver que el aparato sea homologado
en la CE, sino en Bélgica no lo aceptarán
..................................
en la vhf icom IC-M 421
en google se baja el manual
en la pagina 6 lo explica
6
MMSI code programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only once.
After the code programming, it can be changed only
by your dealer or distributor.
q Turn power OFF.
w While pushing [MENU], turn power ON to enter MMSI
code programming condition.
e After the display appears, release [MENU].
r Push [MENU] again to enter the DSC menu.
t Push [] or [] to select “Set up,” push [ENT].
y Push [] or [] to select “MMSI Check,” push [ENT].
u Push [] or [] to set the specific 9-digit MMSI code.
• Push [CH•DUAL] or [16•C] to move the cursor forward or backward,
respectively.
• Push [SCAN•TAG] to clear the MMSI code.
• Push [CLR] to cancel and exit the condition to the set up menu.
i After input the 9-digit code, push [ENT] to set the code.
• Returns to the set up menu.
o Push [CLR] or [] to select “Exit,” push [ENT].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.
Information for FRG version
The DSC channel group MUST be selected before entering
the DSC menu. (p. 7) If other channel group is selected, DSC
operation cannot be performed.
• You should select the DSC channel group before turning power
OFF for entering the MMSI code programming condition.
--DSC Menu--
MMSI Check
Input 9 digits
_________
<CLR˘Exit / ENT˘OK>--DSC Menu--Set upDEL:INDV ID ≤DEL:Group IDOffset Time˘MMSI Check ≥--DSC Menu--Select ItemPosition Input
Received Calls