Creo que deberías emplear ánodos de cinz. El magnesio causa una sobreprotección en agua salada y es adecuado sólo para agua dulce. Se gastará muy rápidamente. Por otra parte la cola dudo que sea de aluminio. Será de una aleación de aluminio.
El aluminio es intermedio entre el Zn y el Mg, más utilizado en aguas sucias, pero no saladas.
Puedes ver esto:
Your choice of anodes requires consideration of three issues: - The kinds of underwater metals on your boat (e.g., stainless steel, bronze, aluminum, mild steel);
- The kinds of water you operate your boat in (e.g., salt, brackish and/or fresh); and,
- If your boat can galvanically couple to other boats around it (i.e., connected to AC shorepower without a galvanic isolator).
For vessels with AC shorepower connections and no galvanic isolation, use Chart A (pdf). For vessels with no AC shorepower connections, or AC shorepower connections with galvanic isolation, use Chart B (pdf).
http://www.boatzincs.com/pdfs/Chart_A-Which_Anodes_Should_I_Use.pdf
http://www.boatzincs.com/pdfs/Chart_B-Which_Anodes_Should_I_Use.pdf