PREGUNTA:
I have a Raymarine Seatalk1 network with a C70 plotter. If I feed the NMEA0183 data from the plotter into the B330, will this info be transmitted over Wi-Fi together with the AIS info?
RESPUESTA:
Yes, the B330 can receive data over the NMEA 0183 port to be multiplexed with AIS and GPS data over WiFi.
Please note that this feature is disabled by default and requires a configuration command to enable it
You will need to send the following command using the Serial Data tab on proAIS2, the B330 configuration tool:
$PSMT,0,3,0x2C75B2FA,0,nvseti "nmea1mux"^2C0x2^2C2^2C0^2C0,0*78
When successful you should see the following acknowledgement:
$PSMT,255,nvseti "nmea1mux"^2C0x2^2C2^2C0^2C0,0,*35
You will then need to cycle the power on the B330 for the change to take effect.
