RUTINA DE CALIBRACIÓN DEL FLUXGATE SEGUN MANUAL EN INGLÉS
Push and hold Standby for 1 second
Keeping boat speed below 2 knots, turn the vessel slowly, in a cire/e, so that it takes at least 3 minutes to complete 360º
Keep turning until the display changes to show the amount of deviation the autopilot has detected. Deviation and current vessel heading will alternate every 1 second .
• Note: If the amount of deviation exceeds 15°, it is recommended the fluxgate is re-sited.
Use the course change keys (+/-l to increase or decrease the displayed heading until it agrees with the steering compass or a known transit bearing.
Exit compass adjust and store the compass correction/alignment as folIows:
• Push and hold Standby for 1 second
or, to exit compass adjust without saving any new settings
• Push Standby momentarily
