I tried six coats of egg white on my bronze prop and cooling water inlet cover with amazing results!! Absolutely NO growth at all after 9 months! Just slipped the boat yesterday and was astounded at how there was no growth whatsoever! as was the marina manager and quite a few onlookers at the marina..yes! i have witnesses!....So,you have now all been informed on this very cheap alternative! This is no yoke!
(
http://www.cruisersforum.com/forums/...p-12961-8.html #109)
... But,the truth is,it works!! or it did for me! and the procedure is simple...
Just clean prop to bare metal,I used wet/dry paper (120grit from memory),then paint on six coats of egg white,allow to dry between coats(I used a hair dryer,as it was quite cold 9 months ago)..that simple!!..and to best of my limited knowledge the egg i used wasn't laid by the hen (or a golden goose!) on a full moon with it's bum pointing to the prevailing trade winds
....
So,I do hope that others who read this,will give it a go and come back and confirm the wonderment of it all....best to leave the magic markers for marking magic! and the money saved from useing prop-sped would be better spent at the bar
(#119)
Luego hay algunos que lo han experimentado, con buenos resultados