Electrónica Weather routing a lo barato

[patxikiter]

Originalmente publicado por maitai

Please tell me if the grib toolbar is still shown after you restart qtVlm or if you have to ask for it again. Someone on Mac has reported a similar problem and I would like to know if it's ok for you.

Hio Maitai
Yes, after restart the program works well.
Thx mate
good job

[Tanausu]

Una duda con la nueva versión 3.4.0

¿Requiere una instalación en un drive USB para equipos Windows de 32 bits?

¿Si la instalo en C: no va a funcionar en un PC a 32?

¿Puedo dejar instalada la versión anterior sin que se me fastidie al probar?

A ver si alguien ha probado ya a hacerlo.

[maitai]

The installator will select automatically 32 or 64 bits depending on your machine. You can force it to 32bits if you want to install it on an USB device and be compatible for both.

You can install it in a separate directory from the previous version and it won't interfere with it (i.e. each installation is not linked in any way with windows registery or such, so they are independent).

[Tanausu]

Muchas gracias maitai.

Probaré la nueva versión, aunque dejando la actual que funciona perfectamente.

Gracias

Hi maitai,

I am trying to build qtVlm under Fedora 18. What I have done so far is the following: First I downloaded the "trunk" directory using svn. I have checked that I have all the packages that are needed in order to build qtVlm (in fact, those packages are, if I am not mistaken, the same you need to build zyGrib that I have sucessfully done). Then I moved into the src directory and run make. I got an error because there is no Makefile in the src directory and, therefore, the compiler does not know what to do...

Do you have an idea on how to solve this problem?

Thanks a lot in advance,

Tropelio

[maitai]

Normally you should have a makefile coming with the trunk. It's located in the trunk directory itself, so you should run the compilation from that directory, not src.

Originalmente publicado por maitai

Normally you should have a makefile coming with the trunk. It's located in the trunk directory itself, so you should run the compilation from that directory, not src.

Thanks a lot maitai, it is working now. I don't know why I was trying to run make from inside the scr directory...

Take care,
Tropelio

[maitai]

Hello,

FYI version 3.4.1 has been released...

Fair winds to all

[dunic]

Originalmente publicado por maitai

Hello,

FYI version 3.4.1 has been released...

Fair winds to all

and



PD : descargas: http://www.virtual-winds.org/oxygen/

[maitai]

Happy new year to all

qtVlm 3.4.4 is almost ready.

Unfortunately the spanish translation has not been updated for a long time. I have send the necessary files to Tropelio (I think) but got no reply... Anyone willing to help?

Hi maitai,

I got your files and I'll update the translation as soon as possible. But give me some time, please.

Take care,
Tropelio

[maitai]

Super, we will wait for you to release then. Many thanks.

[Capitanlanmar]

Hi Matai,
Any comments on the new version features?
Thanks.

[kuovadix]

Originalmente publicado por pinguino

Doy fe de que en Linux funciona.

Esto está que arde. Es una prueba de la fuerza del soft libre. La combinación del trabajo del equipo de Zygrib con la de qtVlm. Genial.

Funcionando en Ubuntu 12.10 gnome-shell Remix.

Y como lo has instalado? por consola o con el synaptic? y otra ayudita, en que parte de la página lo has encontrado para linux? yo no he mirado mucho pero así de bote pronto no lo he sabido ver.

[maitai]

Originalmente publicado por Capitanlanmar

Hi Matai,
Any comments on the new version features?
Thanks.

You can find the tickets here:

Version 3.4.4: http://sourceforge.net/p/qtvlm/featu...estone/v3.4.4/

Version 3.4.3: http://sourceforge.net/p/qtvlm/featu...estone/v3.4.3/

Version 3.4.2: http://sourceforge.net/p/qtvlm/featu...estone/v3.4.2/

Originalmente publicado por kuovadix

Y como lo has instalado? por consola o con el synaptic? y otra ayudita, en que parte de la página lo has encontrado para linux? yo no he mirado mucho pero así de bote pronto no lo he sabido ver.

Yo lo instale compilandolo desde el código fuente. Hay en algún mensaje de este hilo instrucciones de como hacerlo.

Pero ahora con Ubuntu-gnome 14:04 me funciona un repositorio que no recuerdo de donde diablos lo saqué.

Creo que con saucy (13:10) también rula. Es este:

http://doc.hausser.ch/debpackages ubuntu-dha saucy

Mételo e intenta buscarlo tal vez te funcione.

A mi me entra la version 3.4-3-patch3

Originalmente publicado por maitai

Super, we will wait for you to release then. Many thanks.

Ok. I hope to finish before the end of this year! So I think I'll send you the files this afternoon.

[patxikiter]

hola, a alguno le funciona el programa con el GPS, yo no soy capaz.
Feliz año a todos

Hello again maitai,

Please, check your email. I have already send you the updated Spanish translation.

It is possible that some terms have not been properly translated since I would need to know the exact context where they are used in order to choose their proper meaning. However, I hope that those will be exceptions that we'll be able to correct in future versions of the program.

Thanks a lot for your nice program and happy new year,
Tropelio.

Para los usuarios que usan el español: la traducción puede contener errores pues algunos términos necesitan el contexto exacto en el que se usan para elegir el significado preciso. Si alguien descubre alguno de estos errores por favor que me lo indique con el fin de corregirlo en futuras versiones del programa.

[maitai]

Thanks Tropellio,

The release is delayed a bit due to some issues we have with Mac/OS, but normally it's a matter of days.

[josera]

Esperaremos a verlo y yo ya me he apuntado a un cursillo acelerado para descargarlo

Gracias Tropelio

[juburgui]

Gracias

[maitai]

Hello all,

A new qtVlm version has been released, namely 3.4.4-patch1

You can find a list of main modifications here: http://sourceforge.net/p/qtvlm/featu...estone/v3.4.4/

Enjoy and fair winds to all

[Cedemont]

Originalmente publicado por maitai

Hello all,

A new qtVlm version has been released, namely 3.4.4-patch1

You can find a list of main modifications here: http://sourceforge.net/p/qtvlm/featu...estone/v3.4.4/

Enjoy and fair winds to all

And could you be so kind giving to us the right link for downloading? And second question, if we got the old version...do we have to install or reinstall?

Thanks a lot, it´s a great software!!!

[maitai]

As usual the installation files are here: http://sourceforge.net/projects/qtvlm/

You can install the new version over the old one, but you will loose all your settings (because the format of settings has changed in the new release).