Bricobarco Como sujetar reflector radar para que no vuele ..

[Kane]

Bueno, después de haber leído el informe aportado por GermanR -Gracias- lo más importante respecto al reflector de tubo es que para hacer algo debe estar PERFECTAMENTE VERTICAL.A sólo 1º de inclinación su RCS (Radar Cross Section) -superficie equivalente- cae dramáticamente de 9,3 m2 a 0,12. Y eso el grande, de 4".
Se recomienda no instalar para evitar una falsa sensación de seguridad al creer que sus posibilidades de detección se han incrementado.

También confirma mi opinión de que no todos los diedros trabajan al unísono cuando pierde la verticalidad perfecta.


. The 4” tube reflector performed very poorly.
. The 4” Tube reflector had a good peak RCS of 9.3m2 at 0˚. However, as the elevation
angle increased the RCS rapidly decreased. Even at 1˚ the stated performance level
had dropped to 0.12m2.
· The 4” tube reflector is not considered suitable due to its poor performance. It
is also recommended that the 2” tube reflector is not suitable since the
performance of this target will be even lower.
· It is recommended that poorly performing radar reflectors are not fitted as it
is possible that the user could be lulled into a false sense of security believing
that their chances of detection has been enhanced.